Specifications: 4830 available from MV Equipment, CO

 
Specifications: 
MANUFACTURER John Deere
MODEL 4830
Engine  
Make John Deere
Peak rated power (hp) 275
Number of cylinders 6
Displacement, cu. in. (l) 414 (6.8)
Alternator 200 amp
Fuel tank capacity, U.S. gallon (l) 133 (503)
Solution system  
Capacity, U.S. gallon (l) 1000 (3785)
Tank material Stainless Steel
Rinse tank capacity, U.S. gallon (l) 120 (454)
Quick fill size 3-in. (std.), 2-in. optional
Rate control make SprayStar
Model GreenStar 2 Display 2600
Flow meter size ---
Suction strainer 30 mesh
Pressure strainer 50 mesh
Boom strainer 80 mesh
Boom  
Boom width options, ft. (m) 80, 90, 100 (24.4, 27.4, 30.5)
Plumbing material Stainless steel (poly optional)
Ground height adjustment, in. (cm) 27 - 86.5 (68.6 - 220)
Breakaway width, ft. (m) 80-ft. and 90-ft. booms: 6.5-ft. (1.98); 100-ft. boom: 10-ft. (3.05)
Boom sections 7
Drivetrain  
Type Hydrostatic
Drive Full time 4WD
Shifting Electrohydraulic (on the go)
Hydraulic reservoir capacity, gallons (l) 17 (64)
Ground speed w/std. tires, mph (kph) ---
1st range 0 - 13.2 mph
2nd range 0 - 16.7 mph
3rd range 0 - 21.2 mph
4th range 0 - 31 mph
5th range ---
6th range ---
Chassis  
Dry compatible No
Suspension 4 Wheel independent strut-type with air springs
Crop clearance w/std. tires, in. (cm) 60 (152)
Front tires 380/90R46, 320/90R50, 420/80R46
Rear tires 380/90R46, 320/90R50, 420/80R46
Flotation tires 600/85R38
Hydraulic tread adjust Hydraulic (manual optional)
Wheel tread spacing, in. (cm) 120 -152 (305 - 386)
Wheel base, in. (cm) 165.8 (421)
Steering lock-to-lock (turns) ---
Turning radius, ft. (m) 24 (7.3)
Parking brake Hydraulic release
Primary brakes Hydrostatic
Ladder raise/lower Hydraulic
Total weight w/60 ft. boom, lb. (kg) N/A
Total weight w/80 ft. boom, lb. (kg) ---
Total weight w/90 ft. boom, lb. (kg) ---
Total weight w/100 ft. boom, lb. (kg) ---
Total weight w/120 ft. boom, lb. (kg) N/A
Options  
Air compressor Optional
Foam marker capacity, U.S. gallon (l) Direct Injection
Chemical eductor Stainless Steel
   
Specifications are based on published information at the time of publication. Specifications are subject to change without notice. Contact your local John Deere dealer for more information.  
   
Prices are subject to change without notice. Prices are in dollars and only applicable to products sold in the United States. In all cases, current published price lists and incentive program bulletins will take precedence. All trademarked terms, including John Deere, the leaping deer symbol and the colors green and yellow used herein are the property of Deere & Company, unless otherwise noted.