| Specifications: | |
| MANUFACTURER |
John Deere |
| MODEL |
956 (Center-Pivot) |
| Power Requirements |
|
| PTO Speed |
1000 |
| HP 540 rpm PTO, hp (kw) |
--- |
| HP 1000 rpm 1-3/8 in. PTO, hp (kw) |
100-150 hp (75-112 kw) |
| HP 1000 rpm 1-3/4 in. PTO, hp (kw) |
115-180 hp (86-134 kw) |
| Powerline Type |
Grobe Spline |
| Hydraulic Pressure Required |
2500 |
| Cutterbar |
|
| Type |
John Deere |
| Cutting Width, ft.-in. (m) |
14-6 (4.5m) |
| Cutting Height, in. (mm) |
.63-4.6 (16-118) |
| Number of Disks |
9 |
| Number of Knives |
18 |
| Disk Speed, rpm |
2650 rpm |
| Knife Tip Speed, mph |
191 |
| Disk Drive |
gear |
| Lubrication |
Hy-Gard Oil |
| Oil Reservoir Capacity |
11 qts. |
| Cutterbar Oil Check |
combination sight glass/drain plug |
| Cutterbar Angle |
adjustable |
| Angle Adjustment |
mechanical-standard / hydraulic-optional |
| Angle Range |
2 to 8 degrees |
| Cutterbar Protection |
Shearhub |
| Adjustable Gauge Shoes |
2 standard |
| Conditioner |
|
| Impeller |
--- |
| Width, in. (mm) |
106 (268) |
| Diameter, in. (mm) |
23.4 (594) |
| Number of V-tines |
72 |
| Number of Speeds |
2 |
| Drive |
gear |
| Conditioner Hood |
adjustable, single lever |
| Rolls |
--- |
| Width, in. (mm) |
106 (268) |
| Diameter, in. (mm) |
10 (254) |
| Type of Material |
urethane/ steel |
| Design |
recessed cleat (Urethane); Intermeshing flutes (V-10 and Tri-Lobe) |
| Speed |
800 rpm |
| Drive |
gear |
| Windrow Width, in. (m) |
40 to 100 (1020 to 2540) |
| Tractor Hookup |
|
| Standard Hitch |
N/A |
| Ball Joint Equal Angle Hitch |
N/A |
| Rockshaft Swivel Hitch |
standard |
| Drawbar Swivel Hitch |
optional |
| Dimensions |
|
| Overall Width |
--- |
| Transport, ft.-in. (m) |
14-8 (4.5) |
| With Optional Trailer, ft.-in. (m) |
9-8 (3) |
| Overall Length |
--- |
| Conventional Transport, ft.-in. (m) |
26-11 (8.2) |
| With Optional Trailer, ft.-in. (m) |
30-10 (9.4) |
| Weight |
--- |
| With Urethane Roll Conditioner, lb. (kg) |
6969 (3161) |
| With V-10 Steel Roll Conditioner, lb. (kg) |
7209 (3270) |
| With Tri-Lobe Steel Roll Conditioner, lb. (kg) |
7330 (3325) |
| With Impeller Conditioner, lb. (kg) |
6785 (3055) |
| Standard Tires |
31x13.5-15, 8PR |
| General |
|
| Are wrenches required for adjusting |
--- |
| Float |
no |
| Skid Shoes |
no |
| Roll Pressure |
no |
| Roll Spacing |
yes |
| Header Tilt |
no |
| Windrow Width |
no |
| Swathboard |
no |
| Impeller Conditioning Hood |
no |
| |
|
| Specifications are based on published information at the time of publication. Specifications are subject to change without notice. Contact your local John Deere dealer for more information. |
|
| |
|
| Prices are subject to change without notice. Prices are in dollars and only applicable to products sold in the United States. In all cases, current published price lists and incentive program bulletins will take precedence. All trademarked terms, including John Deere, the leaping deer symbol and the colors green and yellow used herein are the property of Deere & Company, unless otherwise noted. |
|
